FCEL - Full Chevron Extruded Louvre
The FCEL 60mm Full Chevron Louvre. This Louvre will not only enhance the look of the building but it will also protect from water ingression into the openings a two stage louvre where ventilation is required with the need for high weatherability and/or aesthetic purposes.
The FCEL is a single blade full chevron louvre with good weather protection under all conditions. The design will give good privacy with no vision through the rear blade. The extruded sections make it a robust louvre ensuring easy installation using a unique proprietary clipping system. Nominal depth of the louvre is approximately 125mm, fitting neatly within block work and most openings without overhang and extra structural support.
The FCEL is a moderate to high performing ventilation product. Free area of up to 58%, dependant on the height and width of the louvre. Standard pitch is 60mm.
Product shall be Email Ventilation FCEL, Full Chevron Extruded Louvre in modular or continuous form with horizontal blade installation. Blades at 60mm pitch for optimal weatherability and privacy, mounted on extruded concealed brackets to provide an unbroken line over the entire length. Concealed supporting mullions will be attached to flashing, jam and sill at maximum 1500mm centres. Depth of the louvre is to be approximately 125mm. Finish is to be mill, powder coated or anodised to specified colour.
Mill, Anodised or Powder Coated
Extruded Weatherproof Design with Water Channels
At mullion centres, generally at maximum 1200mm
Unique extruded clipping system
Bird / Insect
Optional Mesh for Bird/Insect Protection
2mm Formed Aluminium
Internal or External Corners
Optional Extra with or with out Insulation
Little or no maintenance required